Electropolishing Stainless Steel

by admin

If you use your boat in salt water, it’s important that you use fresh water and soap to eliminate the salt build-up that can corrode your boat’s finish. You can also lessen the time and effort of cleaning your boat by cleaning it regularly and by using boat covers when it is not in use.    The type of boat you have and the materials from which it is made will determine what equipment and products are best for cleaning it. For most boats, you will need a heavy duty brush for scrubbing away dirt, grime, stains, and salt.   Some boat owners use more of their time cleaning their boats than they actually spend enjoying them out on the water. Always be sure to follow the boat manufacturer’s instructions on how to clean your boat. While keeping your boat clean and maintained is essential, there is no reason why you need to use so much of your time cleaning. If you use the right equipment and cleaning products, you can save time while maintaining your boat’s beauty and protecting it from destructive marine elements and harsh weather. Other helpful products for boat cleaning include buckets large enough for your brush, sponges, mops, towels, and chamois cloths. The brush and its bristles should be strong enough to withstand repeated use with cleaning products, exposure to the weather, and even salt water. Boats involve a large amount of cleaning and maintenance, though, which can be time consuming and not particularly fun. This will decrease the chances of arm and back strain and will give you the needed leverage for effective boat cleaning. The brush should not be so harsh and rigid that it could damage your boat’s finish or clear coat. Do not allow the soap to dry and remain on your boat for any length of time. they are too harsh and could cause damage to the finish of your boat.

Source: Boat Cleaning Tips ? The Right Equipment Makes the Difference ...

How do I work out current efficiency for an electropolishing process on a complex metal alloy?

Feb 09, 2010 by Hannah D | Posted in Engineering

I'm trying to calculate current efficiency for an electropolishing process taking place at 400mA for a complex superalloy containing Al,Cr, Co, Ni, Re, W, Ti and Ta. I know this somehow involves using the Faraday constant, but I'm not altogether sure

This process depends on so many variables i doubt that anyone could give a definitive answer. The variables are: the amount of metal to be removed, the shape/size of the component, the specific bath, temperature, time, the particular alloy being electropolished

How does electropolishing work?

Jan 08, 2010 by Jake | Posted in Engineering

Hello, I applied for an electropolishing job, and the interviewer had asked me to do some research about this, as I don't have any experience or knowledge in this field. What I do basically know is that its taking a piece of metal and dipping it into

It looks there is a vast field for study in the area of electo polishing processes which is almost stagnant from the last few decades.

how to do electropolishing for silver?

Jan 22, 2008 by AMAR N | Posted in Chemistry

for silver 93.5 pure

You need special electropolishing solutions which you can find described in the following document:

http://www.leiterplatten.com/gt/heft/auf satz/200604%5CGT-849-855.pdf

Leave a Reply